Plastique duguma masin layini .

Aw ka professionnel plastique flooring machine line fabrication!

Zhangjiagang Plastech Machinery Technology Co., Ltd. bɛ Zhangjiagang dugu kɔnɔ, a ye masinw dilannikɛla ŋana ye min bɛ dilancogo, ɲinini ni yiriwali, ani a dilanni fara ɲɔgɔn kan An bɛ plastiki sɔgɔli ko suguya caman dilan, ka recyclage machines peletizing, ka fara plastiki suguya, board ani profiles pipes extrusion machines kan.

Mun na anw sugandi .

nafolotigiw ka ko kɛlenw .

An ka sosiyete ka san 10 ni kɔ dɔnniya bɛ plastiki masin dilanni na.

end-ka-Baara kɛ .

An ye tugu jogoɲumanya hakilina kɔ tuma bɛɛ, o de nafa ka bon kosɛbɛ, baara de ye ɲɛtaa kunba ye.

Teknoloji ɲumanba .

Fɛɛrɛko kura, n’o ye ka to ka an yɛrɛ fanga yiriwa, walasa ka fɛɛrɛw di minnu bɛ se ka kɛ ka ɲɛ ani minnu bɛ se ka kɛ ka ɲɛ, minnu bɛ se ka kɛ ka ɲɛsin kiliyanw ma.

Minɛnw ɲɛtaa .

An bɛ ni masinw ye minnu bɛ se ka baara kɛ kosɛbɛ ani u dilanni taabolo kɔgɔlenba. Minɛn minnu dilanna ka da fɛɛrɛ kura in kan, olu ka baarakɛcogo ka bon, u ka baara kɛcogo ka ɲi ani u ka dannaya barika ka bon.

Paramɛtiri Tekniki .

Modèle extruder .	(mm) . Product thickness .	(mm) . Produit bonya .	(KW) . Produit fanga .	(kg/h) Fanga
SJSZ80/156 .	2,5-8mm .	900-1350mm .	75kw .	300-400kg/h .
SJSZ80/173 .	2,5-8mm .	900-1350mm .	90kw .	500-600kg/h .
SJSZ92/188 .	2,5-8mm .	1000-1350 mm .	110kw .	700-800kg/h .
SJSZ110/220 .	2,5-8mm .	1000-1350mm .	185kw .	1000-1200kg/h .

Nafa minnu bɛ sɔrɔ plastiki duguma masin layini na .

Otomatiki pewu .
Aw bɛ nafa sɔrɔ kosɛbɛ ni otomatiki ye. An ka otomatiki plastiki dugumalan layini bɛ bololabaara dɔgɔya ka sɔrɔ ka fɛnw ɲagami, ka fɛnw bɔ kɛnɛ kan, ka lamini, ka tigɛ, ani ka fɛnw bila ɲɔgɔn na.

Sistɛmu min bɛ kɛ ni extrusion extrusion ye min bɛ se ka kɛ ka ɲɛ .
Plastiki dugumalan layini bɛ a to a ka kɛ fɛn kelen ye ani ka density optimal, ka fanga, muɲuli ani fini bɛɛ lajɛlen ka tile bɛɛ fanga bonya.

Multi-Lamination layer
An ka LVT dugumalan extrusion machine line bɛ multi-Lamination layer, min bɛ se ka kɛ sababu ye ka jiri suman walima kabakurunw cogoya nɔw tiɲɛ minnu bɛ premium appeal fara a kan.

Baarakɛla-Baarakɛcogo ɲuman .
Ni fɛn ye min bɛ se ka kɛ ni fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ ni fɛn ye min bɛ se ka kɛ ni fɛn ye min bɛ se ka kɛ ni fɛn ye min bɛ se ka kɛ ni fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye.

Output customizable .
Aw bɛ fɛnw dilanni sigicogo ladilan nɔgɔya la walasa ka kiliyanw ka ɲininiw dafa, a kɛra plank hakɛw ye, a dilanni cogoyaw, walima a bonya.

Plastiki duguma masinw ka baarakɛcogo .

Residentiel duguma .

A ka ɲi kosɛbɛ sigiyɔrɔw la, sugolanw na, ani dumunikɛyɔrɔw la k’a sababu kɛ u ka muɲuli n’u ka ji ye.

Jagokɛyɔrɔw .

Baara bɛ kɛ ni birow ye, feerekɛyɔrɔw la, ani lotɛli la walasa ka yɔrɔ caman sɔrɔ{0}}TRAFFIC yɔrɔw la minnu bɛ janya{1}}dugukolo-yɔrɔw furakɛli kuntaalajanw wajibiya.

Kɛnɛyaso yɔrɔw .

A bɛnnen don dɔgɔtɔrɔsow ni dɔgɔtɔrɔsow ma, yɔrɔ minnu na saniya ni ladonni nɔgɔya nafa ka bon.

Kalansow .

a bɛ baara kɛ lakɔlisow ni iniwɛrisitew la kalansow ni ɲɔgɔn cɛ.

Industriw ka sigidaw .

Baara bɛ kɛ ni fɛnmarayɔrɔw ni iziniw ye dugumalanw na minnu bɛ se ka doni girinmanw muɲu.

Panneau de mur .

A bɛ se ka kɛ ka kogow masiri, ka funteni ni cogoya fara kɔnɔnakow kan.

Plastikiw ka machine line yɔrɔw .

Fɛn minnu bɛ kɛ ni fɛnɲɛnamafagalanw ye ka kɔn furakɛli ɲɛ ani minnu bɛ ɲagami .
A ka ca a la, plastiki duguma bɛ da polivinili kuloridi (PVC), poliporopilini (PP), walima kabakurun plastiki (SPC) kan. Sani a ka kɛ, a ka bon-Speed mixers bɛ kɛ ka resin, kalisiyɔmu mugu, stabilisateur, plasticizer ani fɛn wɛrɛw ɲagami ɲɔgɔn na cogo kelen na. Mixing equipment minɛn minnu bɛ baara kɛ ka ɲɛ, olu ka kan ka funteni hakɛ jateminɛ walasa ka fɛnw tiɲɛni bali ka da u sumaya kojugu kan ani ka farankanw jɛnsɛn cogo kelen na, ka sira dabɔ walasa ka baara kɛ kɔfɛ.

Extrusion ni Calending minɛnw .
Extruderw ye minɛn jɔnjɔnw ye minnu bɛ kɛ ka plastiki dugumalanw dilan. Degun min bɛ sɔrɔ o kuru wulilen fɛ, o bɛ fɛn ɲagaminen wuli ka a gɛrɛntɛ ka don foroko kɔnɔ. Twin-Screw Extruders ye sugandiliba ye k’a sababu kɛ u ka ɲagami nafa ka bon ani u ka fɛnw ladamuni ka caya. Ka ɲɛsin multi-Flooring composite mayer, CO-Extrusion fɛɛrɛ bɛ sira di baarakɛcogo layɛrɛw danfaralenw doncogo tigitigi ma (i n’a fɔ wear- layɛrɛ min bɛ se ka wuli, layɛrɛ sɛbɛnnen, ani substrat layer). Kalaliminɛnw bɛ kɛ ka fɛn sɔgɔlen digi ka kɛ fɛn kɛrɛnkɛrɛnnen dɔ sɛbɛnw ye, ka fura in ka density ni a ka flakɛli kɔlɔsi ni a bɛ yɔrɔ min bɛ wulilanw ni ɲɔgɔn cɛ, o ladilan.

Molding ani surface furakɛli minɛnw .
Ni presse (hakilila) kɛcogo dɔ bɛ kɛ (i n’a fɔ WPC duguma), hydraulique hot presse (jibɔlan funteniman) bɛ kɛ ka paper decoratif (sɛbɛn masirilen) lamini, wear- resistant layer, ani substrat (sɔgɔsɔgɔninjɛ) funteni ni degunba la. Sɛbɛnni kɛcogo bɛ tali kɛ inkjet imprimantes walima roller imprimantes kan walasa ka se ka modèle ka reproduction précision sɔrɔ sanfɛ. Dɔw ka sanfɛ{4}}End Flooring fana bɛ UV dacogo minɛnw de wajibiya walasa ka surface gɛlɛya walasa ka sɛgɛnbaliya ni nɔgɔ kunbɛncogo ɲɛ.

Fɔɲɔ, foro, ani tigɛminɛnw .
A dilannen kɔfɛ, semi{0}}dugukolo-yɔrɔ-ko ka kan ka nɛnɛ teliya la nɛnɛ ni foromasi-masin na walasa ka sɛgɛn bali min bɛ sɔrɔ funteni degun fɛ. O kɔfɛ, fɛn dilannenw bɛ tigɛ ka kɛ hakɛ dantigɛlenw ye ni tigɛminɛnw ye minnu bɛ kɛ ni otomatiki ye, minnu bɛ sɛgɛsɛgɛ ni u janya tɛ se ka muɲu, ni u bɛ u sanfɛla la, ani ni fɛn wɛrɛw ye minnu bɛ kɛ ni jogo sɛgɛsɛgɛli minɛnw ye, ani laban na, u bɛ kɛ pakew kɔnɔ.

Ladonni min bɛ kɛ ni plastiki ye min bɛ kɛ ka duguma .

Don o don ladonni (don o don sɛgɛsɛgɛli) .

• Don o don ladonni ye ladonni baara jɔnjɔn ye, min kun ye ka gɛlɛya minnu bɛ se ka sɔrɔ, olu dɔn joona ani ka u ɲɛnabɔ ani ka a lajɛ ko minɛnw bɛ cogo ɲuman na sani u kelen-kelen bɛɛ ka boli. Baara kɛrɛnkɛrɛnnenw ye ninnu ye:

• Aw bɛ minɛnw yɔrɔ ni baarakɛyɔrɔ saniya, ka plastiki nɔgɔw, buguriw, ani fɛn wɛrɛw bɔ walasa u kana don masinw kɔnɔ walima tasumabɔlan na.

• Ka tulumafɛnw lajɛ walasa ka tulumafɛnw sɔrɔ minnu bɛ se ka kɛ fɛn jɔnjɔnw ye (i n’a fɔ cakɛdaw ani ɲɛminɛlanw) walasa ka sɛgɛn bali ka kɛ fɛn jalenw ye.

• Ka fiɲɛbɔlan lajɛ (ni a bɛ se ka kɛ) walasa ka fiɲɛ tansiyɔn sabatilen, ji bɔ{0}}fiɲɛ hɔrɔnyalenw, ani fiɲɛ yɔrɔw baaracogo ɲuman i n’a fɔ fiyɛli tasaw ani gripɛriw baaracogo ɲuman.

• Ka minɛnw baaracogo kɔlɔsi, i n’a fɔ motɛri walima sofa bɛ funteni cogo min na, walima ni mankanw bɛ yen minnu tɛ deli ka kɛ ka bɔ fɛnw ciyɔrɔw la.

Kalo o kalo ladonni (a kɔnɔ, ladonni juguman)

• Kalo o kalo ladonni bɛ kɛ ni minɛnw sɛgɛsɛgɛli ni u ladonni ye ka ɲɛ, a ka c’a la, o de bɛ kɛ sababu ye ka fɛɛrɛtigi dɔ sen don a la. Baara kolomaw ye:

• Ka yɔrɔ sɛgɛnnenw bila u nɔ na, i n’a fɔ fɛnw jiginni cɛsirilanw, birikiw, ani sigilanw, walasa ka minɛnw tiɲɛ ka da a kan u sɛgɛnnen don kojugu.

• Ka jibolisiraw sɛgɛsɛgɛ (ni a bɛ se ka kɛ), ka jibolisiraw falen, ani ka tulu siraw saniya walasa ka degun sabatilen sɔrɔ.

• Aw bɛ funteni hakɛ jateminɛcogo jateminɛ walasa ka fɛnɲɛnamafagalanw ni nɛnɛbɔlan hakɛ jateminɛ tigitigi, o bɛ kɛ sababu ye ka fɛn dilannenw jogoko gɛlɛyaw bali minnu bɛ sɔrɔ funteni jiginni fɛ.

• Aw bɛ tulumafɛnw bɛɛ kɛ: Aw bɛ yɔrɔ lamagannenw bɛɛ tulu kɛ cogo labɛnnen na walasa ka masinw ka ɲɛnamaya janya.

pakew ni fɛnw lasecogo .

Pake

An bɛ baara kɛ ni jiri kɛsu barikamaw ye minnu bɛ kɔgɔji la, jiri palɛtiw, poliyetilɛni filimu min tɛ ji bɔ, a ɲɔgɔnnaw.

Táransipɔrɔ

Kɔgɔjida la, tɛrɛnw ni nɛgɛso bɛ yen, ani fiɲɛbɔyɔrɔw la, Shanghai kurunboli yɔrɔ bɛ yen.

Lase waati .

A ka c’a la, a bɛ tile 10-20 ta ni fɛnw bɛ sɔrɔ. Walima a bɛ tile 35-60 bɔ ni fɛnw tɛ stock la, a bɛ kɛ ka kɛɲɛ ni hakɛ ye.

FAQ .

J: I ye fɛn dilan wa?

A: Ɔ̀wɔ, an ye plastiki masinw dilanni ye kabini san 10 ni kɔ.

J: A jiginni don bɛ waati joli bɔ?

A: normalement a bɛ tile 10-20 ta ni fɛnw bɛ sɔrɔ stock la. Walima a bɛ tile 35-60 bɔ ni fɛnw tɛ stock la, a bɛ kɛ ka kɛɲɛ ni hakɛ ye.

J: LVT ka sɛnɛfɛnw bɔli sira ye mun ye?

A: LVT dilanni sira ye fɛn dilanni sira ye min bɛ vinyl raw (PVC) ni farankanw caman sɛmɛntiya ka kɛ vinyl tile (LVT) fɛn dilannenw ye minnu dilannen don. A ka c’a la, o kɛcogo bɛ kɛ ni fɛnw bɔli ye, kalandriya, embossing, ani laminating walasa ka LVT dugumalan caman dilan, o kɔfɛ, tigɛ, pakew, ani jogoɲini sɛgɛsɛgɛliw bɛ kɛ.

J: LVT sɛnɛfɛnw bɔli siraw la, ko minnu bɛ kɛ ɲɔgɔn fɛ, olu ye mun ye ani u bɛ se ka labɛn cogo di?

A: A janya tɛ bɛn: A bɛ sɔrɔ die sigida bɛnbaliw fɛ walima a bɔli funteni fɛ. Furakɛcogo: Aw bɛ to ka minɛnw jateminɛ.
Embossing embossing patterns: min bɛ sɔrɔ degun tɛ sɔrɔ walima cogoya sɛbɛnni cogo jugu fɛ. Furakɛcogo: Aw bɛ a lajɛ ni degun ni patɔrɔn bɛ ɲɔgɔn sɔrɔ cogo bɛnnen na.
Surface defauts (Sanfɛyɔrɔw tiɲɛni): A bɛ se ka kɛ fɛnw nɔgɔli walima funteni jiginni fɛ. Furakɛcogo: Aw bɛ minɛnw bɛɛ saniya ka ɲɛ ani ka funteni hakɛ jateminɛ.
Masina tiɲɛniw: A bɛ sɔrɔ ladonni walima baara cayabaliya fɛ. Fɛnɲɛnɛma: Aw bɛ to ka ladonni kɛ tuma bɛɛ ani ka a lajɛ ni tulu bɛ kɛ ka ɲɛ.

J: Fɛn minnu bɛ se ka kɛ sababu ye ka fɛnɲɛnamafagalanw sɔrɔ, olu jogo bɛ nɔ bila LVT sɔrɔli la cogo di?

A: fɛnɲɛnamafagalanw ka ɲumanya nafa ka bon kosɛbɛ fɛn laban in ka muɲuli, a ɲɛda cogoya ani a kɛcogo dɔnni na. Faantan-PVC walima farankanw jogo bɛ se ka kɛ sababu ye ka fiɲɛw sɔrɔ, i n’a fɔ a kɛcogo tɛ kelen ye, a bɛ fa, walima a bɛ kari LVT tile labanw na. Ka a jira ko fɛn caman bɛ sɔrɔ yɔrɔ caman na, o bɛ dɛmɛ don ka dugumalanw dilan minnu bɛ kɛ tuma bɛɛ, minnu bɛ mɛn, ani minnu bɛ mɔgɔ ɲɛnajɛ.

J: LVT ka fɛn dilanni sira ka kan ka ladon siɲɛ joli?

A: Bana kunbɛncogo ka kan ka kɛ tuma bɛɛ, a ka ca a la kalo 1-3 o kalo 1-3 ka kɛɲɛ ni a dilanni hakɛ ye. Yɔrɔ kolomaw i n’a fɔ Extruders, Dies, ani Calender Systems ka kan ka sɛgɛsɛgɛ ani ka saniya walasa ka baara kɛcogo ɲuman sɔrɔ ani ka tiɲɛniw bali.

J: Ladonni jumɛn de ka kan ka kɛ SPC dugumalan dilanni sira kan?

A: Ladonni basigilen nafa ka bon walasa ka SPC dugumalanw dilanni siraw baara ka ɲɛ. A bɛ tali kɛ sɛgɛsɛgɛliw la minnu bɛ kɛ tuma bɛɛ, saniya, masinw tulu, ani yɔrɔ minnu sɛgɛnnen don, olu nɔnabila i n’a fɔ a mago bɛ cogo min na. Ka tugu a dilabaga ka ladonni bolodalen ni a kɛcogo la, o nafa ka bon kosɛbɛ walasa ka fɛn dilanni sira ɲɛnamaya n’a baara kɛcogo ɲɛ.

J: Yala SPC dugumalan dilanni sira bɛ se ka plank bonya ni a janya suguya wɛrɛw dilan wa?

A: Ɔ̀wɔ, SPC duguma-sɛnɛ siraw bɛ 'fàra-fὲɛrɛw Di planks (dakunw) dilanni na minnu bonya ni u janya tɛ kelen ye. Dilanbagaw bɛ se ka fɛn dilanni sira sigicogo n’a paramɛtiriw ladilan walasa ka kiliyanw ka ɲininiw ni suguya taabolo kɛrɛnkɛrɛnnenw dafa walasa ka plank hakɛ caman sɔrɔ.

An bɛ ka ɲɛ-A bɛ fɔ a ma ko a ye plastiki dugumalanw dilanni ni a feerela ŋanaw dɔ ye Sinuwa jamana na. Aw ni ce ka discount plastic flooring machine line feere yan ani ka quotation sɔrɔ ka bɔ an ka izini na. An bɛ sɔn fana ka kɛɲɛ ni komandiw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.