Masina dɛmɛnan min bɛ kɛ ni plastiki ye .

Aw ka professionnel plastic auxiliary machine manufacturer!

Zhangjiagang Plastech Machinery Technology Co., Ltd. bɛ Zhangjiagang dugu kɔnɔ, a ye masinw dilannikɛla ŋana ye min bɛ dilancogo, ɲinini ni yiriwali, ani a dilanni fara ɲɔgɔn kan An bɛ plastiki sɔgɔli ko suguya caman dilan, ka recyclage machines peletizing, ka fara plastiki suguya, board ani profiles pipes extrusion machines kan.

Mun na anw sugandi .

nafolotigiw ka ko kɛlenw .

An ka sosiyete ka san 10 ni kɔ dɔnniya bɛ plastiki masin dilanni na.

end-ka-Baara kɛ .

An ye tugu jogoɲumanya hakilina kɔ tuma bɛɛ, o de nafa ka bon kosɛbɛ, baara de ye ɲɛtaa kunba ye.

Teknoloji ɲumanba .

Fɛɛrɛko kura, n’o ye ka to ka an yɛrɛ fanga yiriwa, walasa ka fɛɛrɛw di minnu bɛ se ka kɛ ka ɲɛ ani minnu bɛ se ka kɛ ka ɲɛ, minnu bɛ se ka kɛ ka ɲɛsin kiliyanw ma.

Minɛnw ɲɛtaa .

An bɛ ni masinw ye minnu bɛ se ka baara kɛ kosɛbɛ ani u dilanni taabolo kɔgɔlenba. Minɛn minnu dilanna ka da fɛɛrɛ kura in kan, olu ka baarakɛcogo ka bon, u ka baara kɛcogo ka ɲi ani u ka dannaya barika ka bon.

Masini min bɛ kɛ ni plastiki ye, o suguyaw .

An ka tɔn ye nin suguya minnu dilan, olu bɛ sɔrɔ plastiki dɛmɛnan masin na kosɛbɛ:

PVC Pulverizer Machine .

PVC Pulverizer Machine ye masin ye min bɛ baara kɛ ni sɔgɔli, sɔgɔli ani sɔgɔli ye sanfɛ-Speed rotating rotating moving blade ni fixe fixe blade ka PVC hard waste materials (i n’a fɔ profile, pipes, shets, etc.) ka kɛ mugu finman ye.its core feature in the "rotor type, where the main crushing action comme from the high{3} min ni laadala sɔgɔli masinw tɛ kelen ye ka da disiki sariya kan.

Mɔdɛli	SMW500 .	SMW600 .	SMW700 .	SMW800 .	SMW1000 .
Disque disque dur de grinding(mm) .	500	600	700	800	1000
Moteur principal fanga(kw) .	37-45	45-55	55-75	75-90	9-110
Vibrating Sieve Power(KW)	0.75	0.75	0.75	0.75	1.1
capacité(kg/h) .	100-300	200-500	250-600	300-800	400-900

PVC Mixer Machine .

PVC mixer machine ye baara fɔlɔ minɛn nafamaba ye PVC ka fɛn dilannenw dilanni na. A ka baara koloma ye ka PVC resin (PVC mugu) ɲagami ani ka a kɛ ka kɔn a ɲɛ (i n’a fɔ stabilisateurs, plastiques, fillers, lubricants, pigments, wdfl) ni teliyaba ye, cogo kelen na, ani cogo ɲuman na, ka ɲagami ɲumanw di walasa ka bɔ kɔfɛ, ka wuli, ka pikiri kɛ, ani ka fɛn wɛrɛw labɛn.

Mɔdɛli	SRL-Z200/500 .	SRL-Z300/600 .	SRL-Z500/1000 .	SRL-Z800/1600 .
Volume (L) .	200/500	300/600	500/1000	800/1600
Seko ni dɔnko nafama (L) .	150/320	225/380	330/640	600/1050
Yɛlɛma teliya (RPM) .	475/950/130	475/950/100	430/860/50	370/740/50
ɲagami waati (min) .	8-12	8-12	8-15	8-15
Motɛri fanga (KW) .	30/42/11	40/55/11	55/75/15	83/110/22
Dimension bɛɛ lajɛlen (mm) .	458022402470	480026402480	560030003100	517032004480
Weigth (kg) .	3400	3600	6500	9800

Nafa minnu bɛ PVC Pulverizer Machine la .

A bɛ baara kɛ ka ɲɛ ani ka caya-YELID .

Rotor design bɛ ni jiginni teliyaba ye, a ka sɔgɔli kɛcogo ka bon, ani a bɔli ka bon.

A dilanni bɛ taa ɲɛ .

A bɛ se ka baara kɛ ni otomatiki ye ka bɔ balo la ka taa a bila a bɔli la.

A ka ɲi ka kɛ mugu ye .

Mugu minnu bɛ sɔrɔ sɔgɔli ni sɔgɔli fɛ, olu cogoya bɛ kɛ tuma bɛɛ, u bolicogo ka ɲi, u ka funteni ka surun (k’a sababu kɛ nɛnɛbɔlan ye), wa u tɛ nɔba bila fɛnw cogoyaw la.

ladilanni nɔgɔman .

Ni aw ye mesɛri bila a dakun hakɛ danfaralenw nɔ na, mugu laban finman bɛ se ka ladilan hakɛ dɔ kɔnɔ (a ka c’a la, 20-80 mesh, ani fɛn min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ 100 ni kɔ ye).

PVC Pulverizer Machine baarakɛcogo .

Plastique Recyclage .

PVC bɔgɔ caman tigɛli ka kɛ mugu ye min bɛ se ka baara kɛ kokura walasa ka fɛn kuraw dilan.

Pipe dilanni .

Sɔgɔsɔgɔninjɛ pipe scraps ani PVC fɛn gɛlɛnw ka baara kɛ ni u ye.

Sojɔ

ka dɛmɛ don ka PVC profiles, sheets, ani fittings ɲumanw dilan.

PVC Pulverizer Machine yɔrɔ kolomaw .

Jatigi

o la, fɛn kolomaw i n’a fɔ motɛri, rotor assembly (moving blade), fixe blade, crushing chamber, screen mesh, etc.

Balo-sɛnɛ-yɔrɔ .

Spiral feeder walima vibrating feeder, ka balo teliya ni kelenya mara.

Cooling System .

ji-Jakite walima fiɲɛ nɛnɛma-Fɛn nɛnɛma, min bɛ kɛ ka sɔgɔli funteni kunbɛn.

buguri bɔli sira .

Pulse buguri lajɛlan, cyclone separator, ani induced ventilateur, min bɛ kɛ ka mugu dafalen lajɛ ani ka tansiyɔn jugu sigida mara walasa ka buguri bɔli bali.

Electronic Control System .

A bɛ minɛnw bɛɛ daminɛ, u jɔli ani u baarakɛcogo jateminɛ.

Nafa minnu bɛ PVC mixer machine la .

Dispersion uniforme:Aw ye aw jija fɛnɲɛnamafagalanw ni ɲɔgɔn cɛ minnu ni kɛmɛsarada la tan ni tan tɛ kelen ye ka se mɔgɔ ba tan ma) olu bɛ tila ɲɔgɔn na cogo kelen na molekiyɔmu ta fan fɛ, ka u yɛrɛ tanga sigida nafamafɛnw ma fura in na minnu bɛ sɔrɔ ɲagamini kɛcogo bɛnbali fɛ (i n’a fɔ kulɛri danfara, jɛgɛ ɲɛ, ani baarakɛcogo bɛnbali).

Preplasticisation (Gel):Ni funteni ɲagamina, PVC resin fɛnɲɛnamaw bɛ plastiki ni tulumafɛn dɔ minɛ yɔrɔ dɔ la, ka funu dɔɔni, ka sɔrɔ ka ɲagami jalen dɔ kɛ min lafiyalen don ani min bɛ se ka wuli (a bɛ fɔ a ma ko “ja ɲagaminen” walima “PVC ɲagaminen”), o bɛ plastiki kɛcogo ɲuman kɔfɛta ɲɛ kosɛbɛ.

Ji ni fɛnɲɛnamafagalanw bɔli ji la:Funteni min bɛ sɔrɔ funteni caman fɛ-Speed stillring bɛ se ka ji hakɛ nɔfɛta ni tobilikɛyɔrɔ wulibaliw dɔgɔya fɛnɲɛnamafagalanw na, ka bugunw ni porow dɔgɔya fura la.

Ka fɛn dilanni nafa bonya:ɲagami jalen labɛnni bɛ ni ji ye ka ɲɛ, o bɛ a to a tali ka nɔgɔn ani a bɛ balo a yɛrɛma, ka a to a ka to ka taa ɲɛ.

PVC mixer machine baarakɛcogo .

PVC ka fɛn dilannenw:PVC ɲagamilan bɛ se ka kɛ ka PVC pipe, plate, profile, moulding fɛnw dilan ani a ɲɔgɔnnaw. PVC resin fɛ, farankanw, sabatilifɛnw ani fɛnɲɛnamafagalanw ni farankan wɛrɛw kan minnu bɛ ɲagami ɲɔgɔn na, o kɔfɛ fɛnɲɛnamafagalanw bɔli fɛ, pikiri kɛli fɛ ani fɛɛrɛ wɛrɛw fɛ walasa ka PVC fɛn suguya caman dilan.

Color Masterbatch Production:Kulɛri masterbatch dilanni na, PVC ɲagami masin bɛ se ka kulɛri mugu walima kulɛri fɛnɲɛnamaw ɲagami ni plastiki basigilen ye ka dafa walasa ka kulɛri jɛnsɛnni kelen sɔrɔ, ka sɔrɔ ka tɛmɛ granulator fɛ walasa a ka kɛ kulɛri granular masterbatch ye.

thermoplastic lastikuw baarakɛcogo:PVC ɲagami masin fana bɛ se ka kɛ ka lastikuw (i n’a fɔ TPR) baara, ni TPR resin, filler, plasticizer ani fɛnɲɛnamafagalan wɛrɛw ɲagamini ye kelen ye walasa ka baarakɛcogo wɛrɛw dafa.

Plastiki kɛrɛnkɛrɛnnenw baarakɛcogo:PVC ɲagaminen bɛ se ka kɛ fana silikoni, poliyuritani ani plastiki kɛrɛnkɛrɛnnen wɛrɛw labɛnni na. A ka c’a la, o plastiki kɛrɛnkɛrɛnnenw ka kan ka ɲagami kosɛbɛ ani ka u kɛ plastiki ye walasa ka fɛn laban ka ɲɛ.

Plastiki tiɲɛnenw lasegincogo:PVC ɲagami masin bɛ se ka kɛ ka plastiki tiɲɛnenw lasegin u cogo kɔrɔ la. Plastiki fɛnɲɛnamafagalan minnu bɛ segin ka kɛ, olu bɛ se ka labɛn ni plastiki tiɲɛnenw mugumuguli ni u saniyacogo ye, ka u ɲagami ani ka u sumaya, o bɛ se ka kɛ ka plastiki fɛnw dilan tuguni, ka plastiki tiɲɛnenw lasegincogo dɔn.

pakew ni fɛnw lasecogo .

Pake

An bɛ baara kɛ ni jiri kɛsu barikamaw ye minnu bɛ kɔgɔji la, jiri palɛtiw, poliyetilɛni filimu min tɛ ji bɔ, a ɲɔgɔnnaw.

Táransipɔrɔ

Kɔgɔjida la, tɛrɛnw ni nɛgɛso bɛ yen, ani fiɲɛbɔyɔrɔw la, Shanghai kurunboli yɔrɔ bɛ yen.

Lase waati .

A ka c’a la, a bɛ tile 10-20 ta ni fɛnw bɛ sɔrɔ. Walima a bɛ tile 35-60 bɔ ni fɛnw tɛ stock la, a bɛ kɛ ka kɛɲɛ ni hakɛ ye.

FAQ .

J: I ye fɛn dilan wa?

A: Ɔ̀wɔ, an ye plastiki masinw dilanni ye kabini san 10 ni kɔ.

J: A jiginni don bɛ waati joli bɔ?

A: normalement a bɛ tile 10-20 ta ni fɛnw bɛ sɔrɔ stock la. Walima a bɛ tile 35-60 bɔ ni fɛnw tɛ stock la, a bɛ kɛ ka kɛɲɛ ni hakɛ ye.

J: PVC ɲagaminen ye mun ye?

A: PVC ɲagaminen, a bɛ fɔ fana ko PVC ɲagaminen masin, o ye masin ye min bɛ kɛ ka polivinili kuloridi (PVC) resin ni farali suguya caman ɲagami walasa ka ɲagami kelen dilan. PVC ye fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn caman ye, i n’a fɔ a jɔli, mobili, ani fɛn minnu bɛ kɛ ka fɛnw feere.

J: PVC Pulverizer ye mun ye?

A: PVC mugubɔlan dɔ dabɔra kɛrɛnkɛrɛnnenya la walasa ka PVC fɛn gɛlɛnw ni nɔgɔlenw sɔgɔ ka kɛ mugu finman ye. O masinw nafa ka bon kosɛbɛ fɛnw lasegincogo la, o b’a to fɛn dilannikɛlaw bɛ se ka PVC scrap sɛmɛntiya ka kɛ fɛn ye min bɛ se ka baara kɛ kokura izini baara suguya caman kama.

J: Pulverizer machine kun ye mun ye?

A: Minɛnmugu bɛ fɛn gɛlɛnw dɔgɔya ka kɛ mugu finman ye walima fɛn misɛnninw ye ni fanga ye min bɛ kɛ ni masin ye. U bɛ kɛ baarakɛyɔrɔ suguya caman na i n’a fɔ dumuniko, sɛnɛko, jɔli, sɛnɛ, ani fɛnw lasegincogo walasa ka fɛn gɛlɛnw walima fɛnbaw tiɲɛ ka kɛ cogoya ye min bɛ se ka ɲɛnabɔ kosɛbɛ ani min nafa ka bon..

J: Pulverizer machine saniya cogo di?

A: A ka kan ka buguri ko kɔnɔna na ni finimugu sanuman ye fɔlɔ. O kɔ, aw bɛ finimugu ko dɔɔni ka a ko ka ɲɛ. Ni aw bɛ aw janto kosɛbɛ ultrafine pulverizer saniya ni a saniya la, a tɛna dɔ fara masin ka ɲɛnamaya kan dɔrɔn, nka a bɛna kɛ sababu ye fana ka baara nɔgɔya waati bɛnnenw na.

J: Mun bɛ mixer kɔnɔ?

A: Nin yɔrɔ ninnu ye ɲagami-yɔrɔ ye, rotor, sanfɛla ni duguma-bolow, nɛnɛ-minɛn, lubrication system, sealing device ani transmission device. A yɔrɔ kelen-kelen bɛɛ jɔyɔrɔ kɛrɛnkɛrɛnnen bɛ ɲagami kɛcogo la, a bɛ kɛ sababu ye ka ɲagamikɛlan ka baarakɛcogo bɛɛ lajɛlen n’a ka muɲuli kɛ.

An bɛ ka ɲɛ-A bɛ fɔ a ma ko a ye plastiki dɛmɛnan masinw dilanni ni a feerela ŋanaw dɔ ye Sinuwa jamana na. Aw ni ce ka discount plastic auxiliary machine feere yan ani ka quotation sɔrɔ an ka izini na. An bɛ sɔn fana ka kɛɲɛ ni komandiw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.